Removal and replacement bongkar pasang cover hp Laserjet p 2015

Left-side cover

Open the print-cartridge door.

At the back of the printer, use a flat-blade screwdriver to release two tabs (1).

 Removing the left-side cover
3. Lift the cover away from the printer.

Right-side cover

1.Open the print-cartridge door.
2. Remove tray 2.

At the front of the printer, pop the front edge of the right-side cover over the two retaining tabs.

 Removing the right-side cover 4. Lift the cover away from the printer.

Back cover

1. Remove tray 2.
2. Remove the left-side cover and the right-side cover.
3. Remove four screws (1).

 Removing the back cover
4. Tip the printer so that it rests on its front.
5. Release the tab (2) at the back of the printer on the right side.
Lift the cover straight up and away from the printer.

Top cover

1.Remove the left-side cover, the right-side cover, and the back cover
2. Remove two screws (1) at the back of the printer.

 Removing the top cover

3. Remove one screw (1) on the left side of the printer, and remove one screw (2) on the right side of the printer.

Removing the top cover

Release the control-panel cable (1) on the left side of the printer.

 Removing the top cover

5. Lift the top cover off the printer.

Figure  Removing the top cover

Related Posts by Categories