Removal and replacement Memory DIMM Tray 2 printer hp laserjet p 4010 and 4015 series

A " CAUTION:

liSEl The product contains components that are sensitive to electrostatic discharge (ESD).
Always perform service work at an ESD-protected workstation. If an ESD-protected workstation is not
available, discharge body static by grasping the product chassis before touching an ESD-sensitive
component. Ground the product chassis before servicing the product.

1. Remove the formatter cover. See Formatter cover, formatter cage, and formatter PCA
on page 152.
2. Open the formatter cage door.
3. Push the DIMM-locking arms away from the DIMM to release it, and then pull the DIMM out of the
DIMM slot.

Figure  Remove the memory DIMM

Tray 2

Pull the tray out of the product to remove it.

Figure Remove Tray 2

Related Posts by Categories