HP LaserJet 1020

Read More..

Driver HP LaserJet Pro M1536dnf

Free download Driver printer HP LaserJet Pro M1536dnf
Compatibility and system requirements :

• Windows 8
• Windows 7
• Windows Vista
• Windows Server 2008
• Windows Server 2003
• Windows XP

- all drivers Support 32bit and 64bit -

Download link HP LaserJet Pro M1536dnf Printer drivers Download

Read More..

Removal and replacement Memory DIMM Tray 2 printer hp laserjet p 4010 and 4015 series

A " CAUTION:

liSEl The product contains components that are sensitive to electrostatic discharge (ESD).
Always perform service work at an ESD-protected workstation. If an ESD-protected workstation is not
available, discharge body static by grasping the product chassis before touching an ESD-sensitive
component. Ground the product chassis before servicing the product.

1. Remove the formatter cover. See Formatter cover, formatter cage, and formatter PCA
on page 152.
2. Open the formatter cage door.
3. Push the DIMM-locking arms away from the DIMM to release it, and then pull the DIMM out of the
DIMM slot.

Figure  Remove the memory DIMM

Tray 2

Pull the tray out of the product to remove it.

Figure Remove Tray 2

Read More..

Removal and replacement bongkar pasang cover hp Laserjet p 2015

Left-side cover

Open the print-cartridge door.

At the back of the printer, use a flat-blade screwdriver to release two tabs (1).

 Removing the left-side cover
3. Lift the cover away from the printer.

Right-side cover

1.Open the print-cartridge door.
2. Remove tray 2.

At the front of the printer, pop the front edge of the right-side cover over the two retaining tabs.

 Removing the right-side cover 4. Lift the cover away from the printer.

Back cover

1. Remove tray 2.
2. Remove the left-side cover and the right-side cover.
3. Remove four screws (1).

 Removing the back cover
4. Tip the printer so that it rests on its front.
5. Release the tab (2) at the back of the printer on the right side.
Lift the cover straight up and away from the printer.

Top cover

1.Remove the left-side cover, the right-side cover, and the back cover
2. Remove two screws (1) at the back of the printer.

 Removing the top cover

3. Remove one screw (1) on the left side of the printer, and remove one screw (2) on the right side of the printer.

Removing the top cover

Release the control-panel cable (1) on the left side of the printer.

 Removing the top cover

5. Lift the top cover off the printer.

Figure  Removing the top cover

Read More..

Getting the HP LaserJet 1018 printer working on the Raspberry Pi

Read More..