Tampilkan postingan dengan label and. Tampilkan semua postingan
Tampilkan postingan dengan label and. Tampilkan semua postingan
Canon CLI8 and PGI5 Refill and Reset Instructions
Sabtu, 01 Maret 2014
Diposting oleh
empro
di
16.30
0
komentar
Kirimkan Ini lewat Email
BlogThis!
Bagikan ke X
Berbagi ke Facebook
Ink Level Reset for Cartridges HP 21 HP 27 HP 56 HP 58 HP 22 HP28 and HP 57
Rabu, 19 Februari 2014
Ink Level Reset for Cartridges HP 21, HP 27, HP 56, HP 58, HP 22, HP28 and HP 57
At some cases, tutorial reset ink level HP cartridges in this blog sometime fail to. Which is is possible to be caused by the condition of every printer differ. If this way and this fail to reset ink level cartridges HP 21, HP 27, HP 56, HP 58, HP 22, HP 28 and HP28, you can use following methode.
* Turn your computer OFF and then remove cartridge from printer.
* Turn printer off
* Place a piece of tape over the top left contact as shown in BLUE on the picture to the right.
* Turn on printer. Printer will automatically print test page. (if printer does not print a test page but goes through a priming routine continue following steps when routine ends.
* Remove cartridge from printer.
* Place a piece of tape over top right contact as shown in RED on the picture to the right.
* Return cartridge to printer. Printer will go through a series of tests. Which will be quite audible.
* Remove cartridge from printer.
* Place a piece of tape over the two contacts on the right side of the cartridge as shown in GREEN on the picture to the right.
* Return cartridge to printer. Printer will run additional tests and be quite audible.(If you check your ink levels at this point you will receive a “printer busy message”)
* Remove cartridge from printer and remove all tape from cartridge.
* Reinstall cartridge. (If you check your ink levels at this point you will receive a “printer busy message”)
* Turn printer off. Wait for 20 seconds and turn the printer back on. Ink level should now read full.
Read More..
At some cases, tutorial reset ink level HP cartridges in this blog sometime fail to. Which is is possible to be caused by the condition of every printer differ. If this way and this fail to reset ink level cartridges HP 21, HP 27, HP 56, HP 58, HP 22, HP 28 and HP28, you can use following methode.
* Turn your computer OFF and then remove cartridge from printer.
* Turn printer off
* Place a piece of tape over the top left contact as shown in BLUE on the picture to the right.
* Turn on printer. Printer will automatically print test page. (if printer does not print a test page but goes through a priming routine continue following steps when routine ends.
* Remove cartridge from printer.
* Place a piece of tape over top right contact as shown in RED on the picture to the right.
* Return cartridge to printer. Printer will go through a series of tests. Which will be quite audible.
* Remove cartridge from printer.
* Place a piece of tape over the two contacts on the right side of the cartridge as shown in GREEN on the picture to the right.
* Return cartridge to printer. Printer will run additional tests and be quite audible.(If you check your ink levels at this point you will receive a “printer busy message”)
* Remove cartridge from printer and remove all tape from cartridge.
* Reinstall cartridge. (If you check your ink levels at this point you will receive a “printer busy message”)
* Turn printer off. Wait for 20 seconds and turn the printer back on. Ink level should now read full.
Diposting oleh
empro
di
16.31
0
komentar
Kirimkan Ini lewat Email
BlogThis!
Bagikan ke X
Berbagi ke Facebook
Chip Resetter for Canon CLI 8 and PGI 5 Cartridges
Selasa, 18 Februari 2014

DESCRIPTION:
Chip Resetter for Canon CLI-8 and PGI-5 cartridges will reset the OEM Canon CLI-8 and Canon PGI-5 cartridge chips to "new" specs, allowing your printer to recognize the cartridge as new when you refill it. This resetter will yield thousands of successful resets, and is battery powered. Now you can finally refill the Canon CLI-8 and PGI-5 cartridges successfully, and reset the chips on the cartridges so the printer wont know the difference!
The resetter is guaranteed to work on Original brand Canon CLI8 and Original brand Canon PGI5 cartridge chips, but may not work on "compatible chips" manufactured by 3rd parties. As long as you are refilling a genuine Canon CLI8 or PGI5 cartridge, this resetter is 100% guaranteed to bring your chips back to 100% new specifications.
Chip Resetter can be used on the following inkjet Canon cartridges: PGI-5, CLI-8Bk, CLI-8C, CLI-8M, CLI-8Y, CLI-8PC, CLI-8PM, CLI-8G, CLI-8R
Diposting oleh
empro
di
19.30
0
komentar
Kirimkan Ini lewat Email
BlogThis!
Bagikan ke X
Berbagi ke Facebook
Removal and replacement Memory DIMM Tray 2 printer hp laserjet p 4010 and 4015 series
Sabtu, 08 Februari 2014
A " CAUTION:
liSEl The product contains components that are sensitive to electrostatic discharge (ESD).Always perform service work at an ESD-protected workstation. If an ESD-protected workstation is not
available, discharge body static by grasping the product chassis before touching an ESD-sensitive
component. Ground the product chassis before servicing the product.
1. Remove the formatter cover. See Formatter cover, formatter cage, and formatter PCA
on page 152.
2. Open the formatter cage door.
3. Push the DIMM-locking arms away from the DIMM to release it, and then pull the DIMM out of the
DIMM slot.
Figure Remove the memory DIMM
Tray 2
Pull the tray out of the product to remove it.
Figure Remove Tray 2
Diposting oleh
empro
di
23.45
0
komentar
Kirimkan Ini lewat Email
BlogThis!
Bagikan ke X
Berbagi ke Facebook
Removal and replacement bongkar pasang cover hp Laserjet p 2015
Left-side cover
Open the print-cartridge door.
At the back of the printer, use a flat-blade screwdriver to release two tabs (1).Removing the left-side cover
3. Lift the cover away from the printer.
Right-side cover
1.Open the print-cartridge door.2. Remove tray 2.
At the front of the printer, pop the front edge of the right-side cover over the two retaining tabs.
Removing the right-side cover 4. Lift the cover away from the printer.
Back cover
1. Remove tray 2.2. Remove the left-side cover and the right-side cover.
3. Remove four screws (1).
Removing the back cover
4. Tip the printer so that it rests on its front.
5. Release the tab (2) at the back of the printer on the right side.
Lift the cover straight up and away from the printer.
Top cover
1.Remove the left-side cover, the right-side cover, and the back cover2. Remove two screws (1) at the back of the printer.
Removing the top cover
3. Remove one screw (1) on the left side of the printer, and remove one screw (2) on the right side of the printer.
Removing the top cover
Release the control-panel cable (1) on the left side of the printer.
Removing the top cover
5. Lift the top cover off the printer.
Figure Removing the top cover
Diposting oleh
empro
di
04.30
0
komentar
Kirimkan Ini lewat Email
BlogThis!
Bagikan ke X
Berbagi ke Facebook
HP NYSE HPQ results in a 19 revenue decline in printing and imaging
Senin, 27 Januari 2014
HP (NYSE HPQ) is out with Q1 earnings after todays market close, and overall, in keeping with the times, the company is reporting some somewhat stunning numbers, both good and bad. Overall the company is up in quarterly revenue by 1%, year over year, and EPS (non-GAPP diluted) actually increased 8%.
And the imaging and printing story is a bit mixed, with a (to me anyway) stunning 19% decline in quarterly revenue, to $6.0 Billion, but a similarly amazing flat operating profit, at $1.1 Billion, on the back of hugely improved profit margin (18.5%!).
More to follow!
Read More..
And the imaging and printing story is a bit mixed, with a (to me anyway) stunning 19% decline in quarterly revenue, to $6.0 Billion, but a similarly amazing flat operating profit, at $1.1 Billion, on the back of hugely improved profit margin (18.5%!).
More to follow!
Diposting oleh
empro
di
04.45
0
komentar
Kirimkan Ini lewat Email
BlogThis!
Bagikan ke X
Berbagi ke Facebook
Updating April 2012 Observations Facebook and Instagram
Minggu, 26 Januari 2014
In my April 2012 Observations, "What A Difference Seven Years Makes", I covered the (then) recently announced Facebook acquisition of Instagram, characterized then (though Facebook was still pre-IPO) as a One Billion Dollar Deal! In case you were off with the Curiousity on its way to Mars, or somewhere else equally off the grid, Facebook has had their IPO, and now with a stock price currently barely half of its $38 offering price. And most recently (yesterday), the FCC approved the acquisition. On SAI Business Insider, Owen Thomas has some great "new math" on the deal, including the fact the deal is now estimated at a $747 buy.
Read More..
Diposting oleh
empro
di
03.45
0
komentar
Kirimkan Ini lewat Email
BlogThis!
Bagikan ke X
Berbagi ke Facebook
Langganan:
Postingan (Atom)









